Module 9 March Session 2026 Questions with Answer Marked

AME March 2026 Regular – Module 9

  1. Which component is at the centre of the SHEL model?
    1. Software
    1. Liveware
    1. Hardware
    1. Environment
  • What is action to be taken to mitigate the risks of Pressure
  • Never replace a part with one that is incompatible for the sake of getting the job done.
  • Only fix parts you are trained to fix
  • Communicate if you think you will need more time to complete a repair rather than rush through it.
  • The sudden loss of consciousness due to dilation of blood vessels in the skin. a. Heat stroke
    • Heat syncope
    • Heat rashes
  • For Effective communication the person needs to
    • Learn to listen
    • Do not debate
    • Do not pre-plan
    • All of the above
  • If an AME is wearing spectacles or contact lenses then ________
    • The person shall not be restricted to work provided they wear spectacles and contact lenses at all times during their work.
    • The person shall be restricted to work.
    • The person shall not be restricted to work provided the person frequently checks with a doctor to ensure its adequacy.
  • The interface between the SHEL components is very important. Which of the following relates to the environment?
    • Liveware-Hardware interface
    • Liveware-Software interface
    • Neither (a) or (b)
  • Task Lighting should be a minimum of ___________.
    • 100 to 300 foot candles.
    • 200 to 500 foot candles.
    • 200 to 300 foot candles.
  • One of the dirty dozen – ‘Distraction’ can be mitigated by ___________.
    • Use a detailed checklist.
    • Forfeit complex tasks.
    • Take a short break if you are feeling stressed.
  • Lack of awareness can be mitigated by ___________.
    • Ask someone else to check your work.
    • Never compromise your standards.
    • AME should not be assertive.
  1. Mark the correct statement
    1. Latent failures remain dormant for a long time.
    1. Active failures have immediate results.
    1. .
    1. All of the above.
  1. The operator will perform an Error investigation using ________.
    1. MEDA Forms
    1. CAA Forms
    1. Error Management System (EMS) forms.
  1. __________ will result in suboptimal, incorrect, or faulty maintenance.
    1. Complacency
    1. Lack of Communication
WhatsApp Group Join Now
Telegram Group Join Now
Instagram Follow

c.  Distraction

  1. Responsibility for maintaining currency lies with the ________.
    1. Maintenance Organization
    1. Certifying Staff
    1. Both (a) and (b)
  1. When you are the receiver during communication you should __________.
    1. Acknowledge and repeat information as required.
    1. Deliver information clearly.
    1. Ask for confirmation if the message is understood.
  2. Task Analysis includes _________.
    1. End User
    1. Actual User
    1. Common source of error
    1. All of the above
  1. Motivation is ____________.
    1. Easy to measure
    1. Difficult to measure
    1. Can’t be measured
  1. The middle ear is usually filled with air which is refreshed by way of a tube which connects this part of the ear with the ____________
    1. Back of the nose
    1. Back of the mouth
    1. Back of the nose and mouth
  1. How can organisations reduce errors during maintenance?
    1. Reading the maintenance programme.
    1. .
    1. Training
  1. Which of the following is easiest to correct?
    1. Reversible errors
    1. Constant errors
    1. Variable errors
  • Intended departure from procedures or ‘good practices’.
    • Mistakes
    • Slips
    • Violations
  • A ‘Can do attitude’ is positive and ____________.
    • Deprivable
    • But  AME should adopt it
    • But AME should avoid it.
  • MEDA is used to ________________.
    • Assist the engineer only.
    • Assist the investigators to find the root cause of the errors.
    • .
  • Fatigue results in __________.
    • Difficult to detect errors.
    • Forget to perform routine tasks.
    • All of the above.
  • HF Training syllabus should include _____________.
    • Achieve thorough understanding of human factors
    • Recognition of accidents due to human error
    • Both (a) and (b)
See also  100 Questions on Motor and Generators Module 3

25.  Drinking alcohol on duty is
     a. temporary remove form safety sensitive system
     b. Permanent  remove form safety sensitive system
     c.  Acc to country LAW

26. Lack of resources Mitigated by
     a.
     b.  Always have spare parts and equipment

NOTE- THESE QUESTIONS ARE WRITTEN BASED ON MEMORY SO REFER BOOKS FOR ANSWERS.

Leave a Comment