Module 8 Set-11

Practice test for Module 8 Exam

 

Results

#1. In steady, straight and level flight, which force relationship is correct?

#2. Dynamic pressure is defined as:

#3. If true airspeed doubles at constant density, dynamic pressure becomes:

#4. The angle of attack is the angle between the:

#5. . A stall occurs when the aircraft:




#6. . For a given configuration, maximum lift coefficient is reached:

#7. The lift equation is:

#8. At constant weight and configuration, a reduction in air density requires:

#9. The centre of pressure is the point where:

#10. For a conventional subsonic aerofoil, the aerodynamic centre is approximately at:




#11. A cambered aerofoil at zero angle of attack generally produces:

#12. The relative airflow is:

#13. The coefficient of lift is:

#14. If wing area increases while other factors remain constant, lift at the same dynamic pressure and CL:

#15. The chord line joins the:




#16. The leading edge of an aerofoil is the:

#17. The trailing edge is the:

#18. A symmetrical aerofoil at zero angle of attack ideally produces:

#19. The lift-to-drag ratio is a measure of:

#20. In an idealised steady glide, the aircraft’s weight component along the flight path is balanced by:




Previous
Finish