Module 11A Important Points on Chapter Light | ATA 33

DGCA Module 11a Light ATA Chapter 33 Important points

— Strobe Lights , soley used as beacon, 70 flashes / minute ( High Intensity White Flash ) ,
depending on size of aircraft and located at wingtip as a supplement to position light ,
source for short wavelength , Ultraviolet radiation together with intense emissions near
infrared


— Pax , Signs , Value position , instrument dials indicated by – Electroluminescent
—•Strobe light use AC & DC
—• NAV light – 28V AC & 28V DC
—• Strobe light input 400V DC
— Strobe light used in supplement with Navigation Light
—• Ice detection light – LE of wing & intake of engine
— Ice Inspection lights ( Wing scan Light ), sealed beam type & 50-250 watt lamp. Located
on wing or Nacelle flushed in surface


— Ice Inspection Light : Illumination of Wing LE & Engine Inlet
—• Landing Light sealed beam & 600-1000 watts parabolic reflector
—• Light used in Aircraft : Reduce Fatigue , Improve Concentration
—• LED – 30% Less power consumption then incandescent lighting
—• Essential Lights are Escape Slide Lights
—• runway turn off lights,

MTCS
1) Runway turn off lights are mounted on nose landing gear for immediate left and right
side of aircraft
2) On some aircraft type Taxi light will switch off automatically with gear retraction
3) Both***


—•MTCS of Exterior lights
1) runway take off lights illuminate both sides of aircraft * 2) Fuselage light has White colour and position lights have red colour covering 3) 2 logo lights are installed on each horizontal stabiliser to light vertical stabiliser

MTCS , 1) Taxi light are used for operational awareness for ATC & other traffic in flight

2) light in wing roots illuminate horizontally & taxi light converge down as per glide slope inclination

— Landing & Taxi light use Toggle Switch because of Carrying heavy current

— •Rotating Beacon have filament lamp, reflector, motor and Drive mechanism, flashes 40 to 50 times per second

— • light dimming option is not available for fire/overheat or emergency lights to avoid chances of missing in case of bright Ambient conditions

—• Dimming resistor include in light circuit

—• Power supplies for warning an indicator lights are derived from DC Distribution

—• Integral Light 1) flood light 2) Dome light 3) Flight compartment light 4) ALL


— Colour of Flight Compartment is White
—• RED LIGHT : WARNING – alert crew to condition affecting the operation of aircraft
—• AMBER LIGHT : CAUTION Awareness required but not necessarily dangerous
condition
—• BLUE / GREEN LIGHT : Indication and advisory lights

See also  Module 3 March Session 2026 | DGCA Module Exam


— MAGENDA : active flight plan
— CYAN : Non active flight plan


— MTCS , Navigation Lights
1) navigation lights are based on regulation that defined the colour, location and beam
divergence
2) Legal requirement for night flying
3) Are based on filament loops provid steady illumination
4) 20W filament lamp , Tail is 10W & coloured filters produces specific colour and filter
must not Fade or become Opaque
5) ALL ***


Mock Test

Questions

Notes

Comments are closed.