ATA 29 | Hydraulics System Important Points
— All hydraulic system which have hydraulic pump in corporate pressure relief valve
—• Unloading valve is used with many engine driven hydraulic pump to relieve pump output
pressure
—• MTCS Hydraulic – can create push
—• vegetable-based hydraulic fluid is compose of Castor oil & Alcohol ( blue , blue-green , almost clear )
—• MTCS
1) during normal operation, fluid is drawn through the standpipe
2) Emergency Fluid is drawn from bottom of tank
3) BOTH****
—• Hydraulic Fluid
- Class 1 , Low Density , Skydrol LD-4 , purple colour
- Class 2 , Standard Density , Skydrol 500B-4 , purple colour
—• Hydraulic Reservoir Pump : In-Line & Intergral
—• double acting piston displacement type hand pump pressure is connected to centre of
piston
—• Medium pressure system
1) 35 to 150 psi
2) Taken from engine & APU lead
3) 1 + 2 + used in pressurising hydraulic razor wire *
— Medium Pressure – 35 to 150 psi , do not include bottles , serious pressurisation
—• Positive Displacement Pump : Gear Type , Vane Type ,
—• Variable Displacement Pump : Centrifugal type, Propeller Pump
—• Piston type can be positive displacement & variable displacement
— most power driven hydraulic pump- Constant Delivery Pump & Gear Pump
—• MTCS Reservoir :
1) Baffle are incorporated in most reservoir to keep fluid within reservoir from having random movement such as swirling & surging
2) These Condition can cause fluid to foam & air to enter the pump along with Fluid
3) Pressuring assure a positive flow at fluid to pump at high altitude when low atmospheric pressure are encountered
4) ALL
— reservoir which do not require pressurisation below 15,000 ft
Comments are closed.